This item requires freight shipping upon completion of your purchase please contact us to make arrangements and get a quote for freight. Get a Quote BOSS 5/6K Pneumatic Foam Proportioner Features Powerful and Larger heating elements for more material to reach desired Delta-T Air-driven machine with 5" motor Easily att.

This item requires freight shipping upon completion of your purchase please contact us to make arrangements and get a quote for freight.

Get a Quote

BOSS SFE 6/12K Proportioner

Features

• Dual heating blocks for the ISO and Resin provides extra heating elements for colder climates
• Simple 240V single-phase system. The electrical system is all breaker and relay design, for easy repairs if needed.
• Heating elements are much larger than those in competitive machines, capable of heating more material faster than other proportioners
• Designed to spray polyurethane or polyurea
• foam, bed liners, sealants, slab jacking, etc.
• 3,000 psi maximum working pressure
  
• Air-driven machine with 6 motor
• Higher pressure output than 5 series
• Easily attainable components to minimize downtime
• Easy to power-on and power-off
• Digital heating controls
• Hose heat transformer for up to 400 feet of hose

Technical Data

• Preheat 12,000 watts
• 195 degrees maximum fluid temperature
• 32 lb/min. maximum output
• .0500 gal/cycle output each cycle (A & B pumps)
• Fluid inlet 3/4 npt with 1/2 npt outlet
• Fluid outlets
• Component A (ISO) #6 (3/8) JIC with #5 (5/16) JIC adapter
• Component B (Resin) #6 (3/8) JIC with #6 (3/8) JIC adapter
• Fluid circulation1/4 with thermoplastic tubing (3000 psi)
• Parts contacting fluid: stainless steel, zinc plated, carbon steel, aluminum, chrome, brass, PTFE, Viton O-Rings
• Weight 301 lbs
• Dimensions - D:32 x W: 36: x H: 51
• Air requirements - 17 cfm @ 150 psi; requires at least 26-30 cfm @ 175 psi, which is easily acquired with a 18 hp gas air compressor or 10 hp electric air compressor

Compare to:

Graco: EXP1, EXP2, H-20/35, Reactor HXP-1, Reactor HXP-2

PMC: PFX-1600, PHX-2, PHX-25, PHX-40, PH-55

This item requires freight shipping upon completion of your purchase please contact us to make arrangements and get a quote for freight.

Get a Quote

BOSS SFE 5/12K Proportioner

Features

• Dual heating blocks for the ISO and Resin provides extra heating elements for colder climates
• Simple 240V single-phase system. The electrical system is all breaker and relay design, for easy repairs if needed.
• Heating elements are much larger than those in competitive machines, capable of heating more material faster than other proportioners
• Air-driven machine with 5 motor
• Easily attainable components to minimize downtime
• Easy to power-on and power-off
• Digital heating controls
• Hose heat transformer for up to 400 feet of hose
• Designed to spray up to 2,000 psi

Technical Data

• Preheat 12,000 watts
• 195 degrees maximum fluid temperature
• 32 lb/min. maximum output
• .0500 gal/cycle output each cycle (A & B pumps)
• Fluid inlet 3/4 npt with 1/2 npt outlet
• Fluid outlets
• Component A (ISO) #6 (3/8) JIC with #5 (5/16) JIC adapter
• Component B (Resin) #6 (3/8) JIC with #6 (3/8) JIC adapter
• Fluid circulation1/4 with thermoplastic tubing (3000 psi)
• Parts contacting fluid: stainless steel, zinc plated, carbon steel, aluminum, chrome, brass, PTFE, Viton O-Rings
• Weight 276 lbs
• Dimensions - D:32 x W: 36: x H: 51
• Air requirements - 11 cfm @ 150 psi; requires at least 24 cfm @ 175 psi, which is easily acquired with a 13 hp gas air compressor or 7.5 hp electric air compressor

Compare to:

Graco Reactor E-20, A-25, E-30. 

PMC PF-1600, PFX-1600, PH-2, PH-25

This item requires freight shipping upon completion of your purchase please contact us to make arrangements and get a quote for freight.

Get a Quote

Features

• Designed to spray polyurethane or polyurea
• Foam, bed liners, sealants, slab jacking, etc.
• 3,000 psi maximum working pressure
  
• Air-driven machine with 6 motor
• Higher pressure output than 5 series
• Powerful and larger heating elements for more material to reach desired Delta-T
• Easily attainable components to minimize downtime
• Easy to power-on and power-off
• Digital heating controls
• Hose heat transformer for up to 400 feet of hose

Technical Data

• Preheat 6,000 watts
• 195 degrees maximum fluid temperature
• 32 lb/min. maximum output
• .0500 gal/cycle output each cycle (A & B pumps)
• Fluid inlet 3/4 npt with 1/2 npt outlet
• Fluid outlets
• Component A (ISO) #6 (3/8) JIC with #5 (5/16) JIC adapter
• Component B (Resin) #6 (3/8) JIC with #6 (3/8) JIC adapter
• Fluid circulation1/4 with thermoplastic tubing (3000 psi)
• Parts contacting fluid: stainless steel, zinc plated, carbon steel, aluminum, chrome, brass, PTFE, Viton O-Rings
• Weight 276 lbs
• Dimensions - D:32 x W: 36: x H: 51
• Air requirements - 17 cfm @ 150 psi; requires at least 26-30 CFM at 175 psi, which is easily acquired with a 18 hp gas air compressor or 10 hp electric air compressor
  

Compare to:

Graco: EXP1, EXP2, 

PMC: PFX-1600, PHX-2, PHX-25, PHX-40

This item requires freight shipping upon completion of your purchase please contact us to make arrangements and get a quote for freight.

Get a Quote

BOSS 5/6K Pneumatic Foam Proportioner

Features

• Powerful and Larger heating elements for more material to reach desired Delta-T
• Air-driven machine with 5 motor
• Easily attainable components to minimize downtime
• Easy to power-on and power-off
• Digital heating controls
• Hose heat transformer for up to 400 feet of hose
• Designed to spray up to 2,000 psi

Technical Data

• Preheat 6,000 wattts
• 195 degrees maximum fluid temperature
• 32 lb/min. maximum output
• .0500 gal/cycle output each cycle (A & B pumps)
• Fluid inlet 3/4 npt with 1/2 npt outlet
• Fluid outlets
• Component A (ISO) #6 (3/8) JIC with #5 (5/16) JIC adapter
• Component B (Resin) #6 (3/8) JIC with #6 (3/8) JIC adapter
• Fluid circulation1/4 with thermoplastic tubing (3000 psi)
• Parts contacting fluid: stainless steel, zinc plated, carbon steel, aluminum, chrome, brass, PTFE, Viton O-Rings
• Weight 276 lbs
• Dimensions - D:32 x W: 36: x H: 51
• Air requirements - 11 cfm @ 150 psi (machine alone); machine, transfer pumps, and air purge gun will require a compressor capable of producing at least 24 cfm @ 175 psi rating.  This is easily acquired with a 13 hp gas air compressor or 7.5 hp electric air compressor.

Compare to:

Graco Reactor E-20, A-25, E-30. 

PMC PF-1600, PFX-1600, PH-2, PH-25

Spray Foam Equipment & Mfg.

Spray Foam Equipment & Mfg.

The SFE – 5/12K Proportioner is an air driven machine, and the driver is a 5” air motor. The pre-heaters are very high efficiency 6,000 watts per side

Boss SFE Proportioner 5/12 Spray Foam and Coatings Machine

The SFE – 5/12K Proportioner is an air driven machine, and the driver is a 5” air motor. The pre-heaters are very high efficiency 6,000 watts per side

Boss SFE Proportioner 5/12 Spray Foam and Coatings Machine

Spray Foam Equipment & Mfg.

Spray Foam Equipment & Mfg.

Used Rig with Boss 5/12k Used Spray Foam Equipment and Rigs For Sale

Spray Foam Equipment & Mfg.

Learn How a Spray Foam Machine Works

Learn How a Spray Foam Machine Works

Spray Foam Machines, Spray Foam Parts & Equipment

Used Rig with Boss 5/12k Used Spray Foam Equipment and Rigs For Sale

SFE BOSS AP2 Applicator (GEN 2) - Spray Foam Equipment

Use our hose heat transformer with any machine new or old.

SFE Hose Heater w/Digital Controller